HC01P165 1.5mm2 Power & DMX signal combination cable
This is an DMX signal & Lower voltage power hybrid cable for digital AES/EBU. Analog audio signal transmission, for example, for controlling AMX controls in conference rooms or for building automation. By combining two pairs of conductors in a common flame-retardant PVC sheath, higher efficiency in the installation area can be ensured. The AL/PET foil shielding ( 100% coverage) is used to protect the data from the interference of the power cable. For the low voltage range, the conductor cross-section of the 2-core conductors is optimized to 15AWG and 1-core 22AWGmm2.
- DMX cable: 3 x0.31 mm² (22 AWG)
- Stranded tinned copper (TC)
- Power cable: 2×1.5mm2(15AWG) + 1×0.31mm2(22AWG)
- Stranded bare copper (BC)
- Filler: cotton
- Separator: textile fleece
- Ultra flexible PVC outer jacket
- 8.5 mm (Ø) outer diameter

Specifications
| Cable model | HC01P085 | HCB01P085 | HC01P165 |
| Hybrid Cable | |||
| Twisting | 2-core DMX cable + 2-core power cable | 2-core DMX cable + 2-core power cable | 2-core DMX cable + 3-core power cable |
| Taping | Textile fleece | Textile fleece | |
| Outer jacket | PVC,black, Ø7.5 | PVC,black, Ø6.5 | PVC,black, Ø8.5 |
| DMX Cable | |||
| Conductor material | Tinned stranded copper | Tinned stranded copper | Tinned stranded copper |
| Structure of conductor | 28x 0.12 mm | 7x 0.25 mm | 28x 0.12 mm |
| Conductor section | 0.31 mm2 (22AWG) | 0.31 mm2 (22AWG) | 0.31 mm2 (22AWG) |
| Insulation | PE | PE | PE |
| Number of cores | 2 | 2 | 2 |
| Insulation colours | Red / White | Red / White | Red / White |
| Drain wire | 7x 0.2 mm | 7x 0.2 mm | 7x 0.2 mm |
| Shielding | AL/PET-foil | AL/PET-foil | AL/PET-foil |
| Outer jacket | No | No | No |
| Conductor resistance-100M | ≤ 5.6 ohm | ≤ 5.6 ohm | ≤ 5.6 ohm |
| Capacity (C/C) @ 1kHz | 45 pF/m | 45 pF/m | 45 pF/m |
| Characteristic impedance | 110 ohm | 110 ohm | 110 ohm |
| Power Cable | |||
| Conductor material | Bare stranded copper | Bare stranded copper | Bare stranded copper |
| Conductor | 2×16/0.254mm | 2×16/0.254mm | 2×85/0.15mm+18/0.15 |
| Conductor section | 2×0.81mm2 | 2×0.81mm2 | 2×1.5 mm2 + 0.31mm2 |
| Conductor section | 18AWG | 18AWG | 15AWG + 22AWG |
| Insulation material | PVC | PVC | PVC |
| Number of cores | 2 | 2 | 3 |
| Jacket | No | No | No |
Packaging
- Plastic Reel, Wooden spool, Shrink-plastic packaging, Roll, Pallet;
- Length: 100M
- Lower and upper lengths according to availability. Special packaging on request.


